We offer complete paint plant on turn key basis. Where a high level of size reduction & dispersing takes place in a pressurized chamber. A shaft fitted with wear resistant impeller discs agitates the grinding media. Particle size reduction in sub-micron size is possible in a single pass. Mills are equipped with a cooling chamber as a standard feature.

Frigmaires Attritor is used for producing fine & homogeneous dispersions quickly & repeatedly under controlled conditions. Used for the manufacture of ceramics, inks, paints, coatings, metal oxides, ferrites, chocolates, chemicals & allied products. The Attritor is often referred to as a agitated ball mill. The material to be ground is charged into a vertical tank filled with grinding media. Both the material and grinding media are then agitated by a shaft with arms causing the media to exert shearing & impact forces on the material. This action produces an extremely fine material measured in microns. No pre-mixing is required. All attritors are provided with cooling jackets. Recirculating facility is available as optional.

Bead bills reduce particles to sub micron size. Consisting of a cylindrical vessel that contains a motor-driven central shaft, which is equipped with impellers of different types. Bead mill comes with an enclosed vessel. While operating this enclosed vessel is filled with grinding media, agitator shaft activates media, creating shearing and strong forces. Rotation of agitator imparts energy to surrounding media. Forces either fracture, tear, or crush particulate. It can be operated continuously since it is equipped with devices, which retain the beads within the milling chamber. Then the final product is evenly dispersed in liquid.

A Disperser is a single shaft mixer used to break apart or dissolve solid particles in a liquid. This is typically accomplished using a "saw tooth" blade rotating at high speed (approximately 5200 feet per minute peripheral speed). The blade imparts high shear forces to the ingredients to be dispersed, breaking them apart. Through proper blade selection and sizing, a flow can be established that will repeatedly turn over the batch and yield a homogeneous product. Dispersers are most often used to mix low viscosity products such as paints.

Putty Mixer is excellent for mixing of putties and high viscosity material. The discharge is from the bottom valve. Two shafts run in opposite directions. The shafts are mounted on bearing blocks. The blades are fabricated from plates and are clamped onto the shaft for easy maintenance. The final drive run through rear gears in an oil bath. The entire machine is fitted on a sturdy frame fabricated to minimize vibrations.

A gyro shaker is used for blending paints, plasters, lacquers, sparkling compounds, chemicals and other hard to mix compounds in a short span. Gyro mixers enables effective mixing, uniform blending and homogeneous mixing. Gyro Shakers are durable, easy to use, reliable and guarantees smooth and trouble free operation.